Först woodchippers
Sales, servicing, service kits and every part, from Forest Park & Garden in Treforest. Ten machines from 6 to 8 inches, wheeled and tracked.
Wheeled chippers
Road-tow machines, from the 745 kg ST6P to the 8-inch ST8D.
ST6P
6-inch petrol wheeled woodchipper
- Opening
- 6" × 8"
- Vanguard petrol
- 40hp
- Weight
- 745 kg
ST6P HD
6-inch petrol wheeled woodchipper, heavy duty
- Opening
- 6" × 8"
- Vanguard petrol
- 40hp
- Weight
- 885 kg
ST6D 24
6-inch diesel wheeled woodchipper
- Opening
- 6" × 8"
- Kubota diesel
- 24hp
- Weight
- 1,005 kg
ST6D 42
6-inch diesel wheeled woodchipper
- Opening
- 6" × 8"
- Doosan diesel
- 42hp
- Weight
- 1,105 kg
ST8D
8-inch diesel wheeled woodchipper
- Opening
- 8" × 10"
- Doosan diesel
- 55hp
- Weight
- 1,375 kg
Two more wheeled machines, the TT6 turntable chipper and the ST8P 8-inch petrol: ask us what’s available.
Tracked chippers
For gardens, slopes and sites a truck can’t reach, up to the bank-climbing XR8D.
TR6P
6-inch petrol tracked woodchipper
- Opening
- 6" × 8"
- Vanguard petrol
- 40hp
- Weight
- 1,200 kg
TR6D 24
6-inch diesel tracked woodchipper
- Opening
- 6" × 8"
- Kubota diesel
- 24hp
- Weight
- 1,300 kg
TR6D 42
6-inch diesel tracked woodchipper
- Opening
- 6" × 8"
- Doosan diesel
- 42hp
- Weight
- 1,430 kg
TR8D
8-inch diesel tracked woodchipper
- Opening
- 8" × 10"
- Doosan diesel
- 55hp
- Weight
- 1,625 kg
XR8D
8-inch diesel tracked woodchipper for banks
- Opening
- 8" × 10"
- Doosan diesel
- 55hp
- Weight
- 2,135 kg
Not sure which one? Tell us what you chip and where, or compare the range.
The range, side by side
| Model | Opening | Engine | Fuel | Weight | Width | Length, hopper up | Height | Tank |
|---|---|---|---|---|---|---|---|---|
| ST6Pwheeled | 6" × 8" | 40hp Vanguard | Petrol | 745 kg | 1.3 m | 3.3 m | 2.2 m | 30 L |
| ST6P HDwheeled | 6" × 8" | 40hp Vanguard | Petrol | 885 kg | 1.3 m | 3.3 m | 2.3 m | 30 L |
| ST6D 24wheeled | 6" × 8" | 24hp Kubota | Diesel | 1,005 kg | 1.3 m | 3.6 m | 2.2 m | 30 L |
| ST6D 42wheeled | 6" × 8" | 42hp Doosan | Diesel | 1,105 kg | 1.4 m | 3.6 m | 2.3 m | 30 L |
| ST8Dwheeled | 8" × 10" | 55hp Doosan | Diesel | 1,375 kg | 1.5 m | 3.7 m | 2.4 m | 35 L |
| TR6Ptracked | 6" × 8" | 40hp Vanguard | Petrol | 1,200 kg | 0.8 – 1.1 m | 2.7 m | 2.4 m | 30 L |
| TR6D 24tracked | 6" × 8" | 24hp Kubota | Diesel | 1,300 kg | 0.82 – 1.2 m | 2.6 m | 2.3 m | 30 L |
| TR6D 42tracked | 6" × 8" | 42hp Doosan | Diesel | 1,430 kg | 1.2 m | 2.6 m | 2.3 m | 30 L |
| TR8Dtracked | 8" × 10" | 55hp Doosan | Diesel | 1,625 kg | 1.3 m | 2.7 m | 2.4 m | 35 L |
| XR8Dtracked | 8" × 10" | 55hp Doosan | Diesel | 2,135 kg | 1.5 – 2.0 m | 2.6 m | 2.5 m | 35 L |
Figures are Först’s published specifications.
What every Först shares
FörstGrip feed rollers
Twin hydraulic rollers. The top one lifts on an arc and is held down by two heavy springs, so it climbs over butt ends and drags in forks and awkward limbs.
Open-top flywheel
The flywheel throws the chip instead of blowing it, with twin blades and rear draught fins. Wet, green material is far less likely to block the chute.
AutoIntelligence control
Sealed electronics that run the no-stress feed, tell you when a service is due and prompt the routine checks. Proof against water and vibration.
Först has built chippers in Britain since 2013 and is a Made in Britain member. Machines carry Först’s three-year warranty.
Parts on Först’s own drawings
8 machines, 688 part numbers. Pick the machine, click the part on the exploded drawing, and see our price and stock.
Open the Först parts finderService parts for earlier machines and the Cadet
| Machine | Oil | Service parts |
|---|---|---|
| Cadet 6 (23hp petrol) | 5W-30 | Air filter 24-99-113, Hydraulic return filter 12-24-054, Engine oil filter 24-99-003, Fuel filter, in-line 24-99-004, Spark plug 24-99-005 × 2 |
| Cadet 6 TR | 5W-30 | Air filter 24-99-113, Hydraulic return filter 12-24-054, Engine oil filter 24-99-003, Fuel filter, in-line 24-99-004, Spark plug 24-99-005 × 2 |
| ST6D (Yanmar) | 15W-40 | Hydraulic return filter 12-24-054, Engine oil filter 13-99-001, Fuel filter 13-99-002, Water separator filter 13-99-003, Phosphor bronze bearing 12-01-052 |
| TR6D (Yanmar) | 15W-40 | Hydraulic return filter 12-24-054, Engine oil filter 13-99-001, Fuel filter 13-99-002, Water separator filter 13-99-003, Phosphor bronze bearing 12-01-052 |
| ST8 (45hp Kubota) | 15W-40 | Air filter JP34-100, Hydraulic filter, in-line 12-24-028, Engine oil filter JP01-100, Fuel filter, in-line JP29-100, Fuel filter JP02-100, Phosphor bronze bearing 12-01-052 |
| TR8D (45hp Kubota) | 15W-40 | Air filter JP34-100, Hydraulic filter, spin-on 12-24-047, Engine oil filter JP01-100, Fuel filter, in-line JP29-100, Fuel filter JP02-100, Phosphor bronze bearing 12-01-052 |
Talk to us about a Först
Tell us what you're chipping and where. We'll come back with a price, what's in stock, and a demonstration if you want to see it work first.
- Send the form or call. It reaches our machinery team in Treforest.
- We call you back. Price, availability, and answers on finance or part exchange.
- See it chip. We arrange a demonstration before you commit.
Prefer to talk? 01443 230000
Forest Park & Garden, Coed Court, Treforest. Sales, workshop servicing and parts under one roof.