TR6P Först 6-inch petrol tracked woodchipper

A compact 6-inch tracked chipper with the 40hp petrol V-twin. The lower-cost way onto tracks.

Get a quote or book a demoCall 01443 230000

Available to order

Först TR6P woodchipper
feed opening
6" × 8"
Vanguard V-twin petrol
40hp
weight
1,200 kg
wide, tracks in
0.8 m

How the TR6P is built

  • FörstGrip feed rollers

    Twin hydraulic rollers. The top one lifts on an arc and is held down by two heavy springs, so it climbs over butt ends and drags in forks and awkward limbs.

  • Open-top flywheel

    A 640 × 25 mm flywheel with twin 8-inch blades throws the chip instead of blowing it, so wet, green material is far less likely to block the chute.

  • 40hp V-twin petrol

    A Briggs & Stratton Vanguard with electronic fuel injection: fuel on demand, and a three-year engine warranty.

  • Variable-width tracks

    Tracks in at 0.8 m for the garden gate, out at 1.1 m for stability on rough ground.

  • AutoIntelligence control

    Sealed electronics that run the no-stress feed, tell you when a service is due and prompt the routine checks. Proof against water and vibration.

  • Touch-button feed

    Illuminated IP69-rated touch pads on both sides of the hopper, with a traditional feed bar as well.

  • Built to last

    Heavy-gauge steel where it matters and extra support under the hopper.

  • Variable roller speed

    Slow the feed for hardwood, speed it up for brash.

  • Easy-access anvil

    The anvil turns or swaps in minutes, so a fresh edge is never a workshop job.

  • Clear fuel tank

    A see-through 30-litre tank with a wide filler neck. You can read the level from across the yard.

Photos of the TR6P

Först TR6P, photo 1 Först TR6P, photo 2 Först TR6P, photo 3 Först TR6P, photo 4 Först TR6P, photo 5 Först TR6P, photo 6 Först TR6P, photo 7

Photos: Först.

TR6P specification

Feed opening
6" × 8"
Flywheel
Open top, 640 × 25 mm
Blades
Twin 8-inch
Engine
Briggs & Stratton Vanguard V-twin, petrol
Power
40hp (earlier machines 37hp)
Feed roller system
FörstGrip feed rollers
No-stress system
AutoIntelligence no-stress device
Feed control
AutoIntelligence touch pads, water and vibration proof
Fuel tank
30 litres
Noise level
LwA 122 dB
Weight
1,200 kg
Width, tracks in / out
0.8 m / 1.1 m
Length
2.7 m
Height with chute
2.4 m
Engine warranty
3 years

Figures are Först’s published specification. Ask us to confirm anything that matters for your job before you order.

TR6P service kit

The filters and service parts this machine takes, from our own stock list. Engine oil: 5W-30.

  • Air filter, outer Part no. 24-99-001
    Price on request
    Ask us
  • Air filter, inner Part no. 24-99-002
    Price on request
    Ask us
  • Hydraulic filter, spin-on Part no. 12-24-047, change after the first 20 hours, then every 500
    Price on request
    Ask us
  • Engine oil filter Part no. 24-99-003
    £19.61 + VAT (£23.53) 1 in stock
    View
  • Fuel filter, in-line Part no. 24-99-004
    Price on request
    Ask us
  • Spark plug × 2 Part no. 24-99-005, the engine takes two
    Price on request
    Ask us
  • Phosphor bronze bearing Part no. 12-01-052
    Price on request
    Ask us

Every TR6P part, on Först’s own drawings

257 parts across 22 exploded drawings. Click a part on the drawing to see our price and stock, then add it to the basket.

Open the TR6P parts drawings

Ask about the TR6P

Tell us what you're chipping and where. We'll come back with a price, what's in stock, and a demonstration if you want to see it work first.

  1. Send the form or call. It reaches our machinery team in Treforest.
  2. We call you back. Price, availability, and answers on finance or part exchange.
  3. See it chip. We arrange a demonstration before you commit.

Prefer to talk? 01443 230000

Forest Park & Garden, Coed Court, Treforest. Sales, workshop servicing and parts under one roof.

I'd like

We only use your details to answer this enquiry.

More from Först